Veritas® Scrub Plane

The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 3" radius, so that it takes an aggressive cut. This is the tool you use to get stock into a condition where you then can use a smooth plane. The curved cutting edge of the 1-1/2" wide by 3/16" thick blade gives a distinctive, hand-worked texture to the workpiece. It is sometimes used by timber framers to replicate gouge marks.

This is a single-iron tool, meaning there is no cap iron or chip breaker. Set screws along the side prevent the blade from shifting sideways when knots are encountered.

 

 


 

Write a review

Note: HTML is not translated!
    Bad           Good

Veritas® Scrub Plane

  • Brand: Veritas tools
  • Product Code: 05P35.71
  • Availability: Out of stock
  • 1,822.50kr (SEK)

  • Ex Tax: 1,458.00kr (SEK)

Tags: veritas® scrub plane, 05p35.01, veritas tools, specialplanes