Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Change it if it was wrong or if you want to show the VAT of another country.

The correct VAT will be automatically shown at the checkout regardless of which country you choose here.

We have used your IP number (18.204.2.146) or if you have approved location services, to find the information. This information is only used to show the correct VAT on the products and is then used at checkout.

Country:


Moxon Vise

Moxon Vise - includes:
>>Two hard maple wood Moxon vise screws
  • Total Length approx: 12"
  • Hand grip approx.size: 2-3/8" diameter x 4" long
  • Threaded section approx.size: 1-3/4" diameter x 7" long
  • 3-1/2 Threads Per Inch (TPI)
  • Vise screws are ready for finish 
 >> One hard maple front Moxon vise jaw
  • Approx.size 1-3/4" thick x 4" tall x 32" long 
  • Front jaw has an 1/8" overhang which is used to align the vise to the front of the workbench 
  • Oblong shaped clearance holes on front vise jaw allows clamping of tapered objects
  • Front vise jaw is surfaced 4 sides and ready to sand or smooth plane
 >> One hard maple rear Moxon vise jaw   
  • Approx.size 1-3/4" thick x 3-7/8" tall x 36" long 
  • Threaded holes
  • Rear vise jaw is surfaced 4 sides and ready to sand or smooth plane
 >> Moxon vise capacity
  • 4-1/4" of capacity between the jaws
  • Ability to clamp a full 24" wide panel between the vise screws

>> Moxon Vise Assembly and Use Instructions

 

Write a review

Note: HTML is not translated!
    Bad           Good

Moxon Vise

  • 2,038.75kr (SEK)

  • Ex Tax: 1,631.00kr (SEK)

Related Products

Moxon US500

Moxon US500

Moxon US500 - workbench spindles - speed wheels with a thread length of 240mm..

1,960.00kr (SEK) Ex Tax: 1,568.00kr (SEK)

Tags: moxon vise, lei-mv, lake erie toolworks, woodworking vises