Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (3.235.56.11) for this check.

Country:


This adapter for our Mk.II honing guide expands its blade-holding capacity to allow consistent, accurate honing of mortise chisels. It increases the space between the roller base and the blade carrier to accommodate the thicker blades of mortise chisels, holding blades up to 11/16" thick.

Compatible with the narrow-blade clamping heads, the adapter is configured so that the angle registration jig will yield the correct bevel angle in the 30° to 35° range typical of mortise chisels. Cast from a zinc-aluminum alloy.

Write a review

Note: HTML is not translated!
    Bad           Good

Mortise Chisel Adapter for Veritas® Mk.II Narrow-Blade Honing Guide

  • Brand: Veritas tools
  • Product Code: 05M09.12
  • Availability: In Stock
  • 100.00kr (SEK)

  • Ex Tax: 80.00kr (SEK)

Tags: Mortise Chisel Adapter for Veritas® Mk.II Narrow-Blade Honing Guide, 05M09.12, Honingguides