Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Change it if it was wrong or if you want to show the VAT of another country.

The correct VAT will be automatically shown at the checkout regardless of which country you choose here.

We have used your IP number (18.204.2.146) or if you have approved location services, to find the information. This information is only used to show the correct VAT on the products and is then used at checkout.

Country:


This Trend product needs to be ordered. We do not have it in stock. Approximate delivery time is 2 weeks.

Tradesman ALL IN ONE work top jig for up to 900mm worktops.
Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 635mm, 650mm, 700mm and 900mm wide worktops.
Cuts up to 40mm thick worktops with or without anti-drip postformed edge.
Three open-ended bolt recesses (dog bone style) for 150mm bolts.
Engraved lines for short 65mm bolts and worktop cross-cut.
10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.
Engraved markings for identification of pin holes.
Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter ref. GB30.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.

Write a review

Note: HTML is not translated!
    Bad           Good

Kitchen Worktop Jig 900mm

  • Brand: Trend UK
  • Product Code: KWJ900
  • Availability: Pre-order
  • 2,725.00kr (SEK)

  • Ex Tax: 2,180.00kr (SEK)

Tags: Kitchen Worktop Jig 900mm, KWJ900, Fräsjiggar