Our jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges.
It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be tightened with a 25¢ piece (to accommodate skiers).
In the shop, it is invaluable for jointing scrapers and handsaws; the fence is relieved next to the file to accommodate tooth set. Anodized aluminum with solid brass screws. Use with a 6" or 8" mill file (not included).
Filing and tooth damage will leave saw teeth at uneven heights. It is important to regularly joint handsaws for maximum cutting efficiency.
Jointing is done before any teeth are sharpened. With a mill file clamped in the jointer, lightly joint the teeth until they are all the same height. (In the case of a breasted saw, the jointer will more or less automatically follow the curve of the blade.) Joint the saw only until a slight flat appears on the shortest tooth.
When sharpening, file away half of the flat as you do one tooth bevel and then file away the other half as you do the second bevel. File only until the flat is gone. All the teeth will then be the same height.
JOINTING CABINET SCRAPERS AND SCRAPING
The Veritas Jointer is excellent for cabinet scrapers because it is a fast way to restore a straight, square edge once the burnished hook has dulled. It is best to clamp the scraper in a vise, using a piece of scrap wood as backing, to prevent the scraper from flexing while it is being jointed. File until the old hook is removed. Because the file marks are all parallel to the edge of the scraper, you can go directly to burnishing without stoning.
The 45° fence is used to restore scraping plane blades. Once again, it is best to hold the blade in a vise for filing
Sharp ski edges are critical to good control. Joint the steel edges very lightly as necessary.
- Brand: Veritas tools
- Product Code: 05M07.01
- Availability: In Stock
- Ex Tax: 159.00kr (SEK)