Total Lenght (mm)
Working Lenght (mm)
Designed for easy adjustment, these traditional bench vises have steel spindles and large cast iron faces. The movable jaw has a slight inward cant to let the top of the jaw touch fi rst as it closes. Under clamping pressure, this jaw becomes parallel with the fi xed jaw, providing more consistent pressure over the entire jaw face so work is held securely. The quick release is designed for one-handed operation; the screw is disengaged by two counterclockwise turns of the handle, allowing work to be held with one hand as the vise is quickly adjusted with the other.
Both jaws are through-drilled for wooden faceplate attachments. The moving jaw has an adjustable steel dog. The large vise requires a space 20Й long for the spindle and guide rods. The medium and small sizes require 18Й and 13Й
respectively. All are excellent for equipping a new bench, or adding to an existing one.
Components of quick release system ( Picture . 1) :
2. Quick-Release Nut
3. Front jaw
You must fasten the vise to the bottom of a bench for the gravitional element of the quick release to operate properly.
Operating the Quick-Release function:
By turning the handle counterclockwise (CCW) about 1-1/2 to 2 turns, the quick-release nut releases the main screw. You can then slide the vise open or closed. By turning the handle clockwise (CW) about 1-1/2 to 2 turns, the quick release nut re-engages the main screw and allows you to tighten the vise normally.
Caution ! !
Take care to not close the vise on your fingers.
Front Vise quick release, large
- Brand: York
- Product Code: HVRQ 803
- Availability: Out of stock
- Ex Tax: 1,389.00kr (SEK)