| The knob and wheel have elegant elliptical knurled edges for a firm grip. | |
 |
The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface with tactile cues for finger placement. |
|
|
The Norris-type adjuster mechanism combines feed and lateral adjustments, making blade setting accurate and easy. |
|
|
Close manufacturing tolerances reduce backlash to no more than 1/4 turn. |
|
|
The adjuster is locked to the body and will not become inadvertently unseated. |
|
|
Mouth adjustment is effected by loosening the stainless-steel locking knob. |
|
|
An unobtrusive set screw in the plane throat allows repeatable mouth positioning while at the same time preventing the moveable toe from contacting the blade. |
|
|
The toe is completely enclosed by the body casting. |
|
|
The contoured body is 7" long by 1-3/4" wide and has a 12° bed angle. It is machined and surface ground to half our normal flatness and surface finish specifications; the sole and sides are flat and square to within +0.000" and -0.0015" over the entire surface. |
|
|
The A2 tool steel blade is 1-3/8" wide, 9/64" (0.140") thick and hardened to Rc60-62. The blade has a primary bevel of 23° and a secondary bevel of 25°. The back of the blade is lapped flat within + or -0.0002" (two-tenths of a thousandth of an inch) in the working area of the blade. |
|
|
Made from our regular ductile iron, has a die-cast lever cap and is finished with a durable powder-coat polymer paint. |
DX60 Block Plane
- Brand: Veritas tools
- Product Code: 05P70.01
- Availability: Out of stock
-
2,046.25kr (SEK)
- Ex Tax: 1,637.00kr (SEK)
Tags: dx60 block plane, 05p70.01, veritas tools, block planes, veritas planes