Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (3.235.56.11) for this check.

Country:


  • Aluminum Sliding Bevel with Angle Scale 45cm

Useful for checking angles on welded areas

Blade can be on either side of the stock for symmetrical work

Cross brace prevents any accidental change in angle

Light aluminum material

Thick blade can be used as a guide for a circular saw

Angle scale is 1°pitch for 20°- 120°, and gradient scale is 1/10 pitch for 0 - 10

Screw stopper easy to tighten and loosen

Measured angles can be written on a specially installed tape with a pen or pencil. (An eraser works well on this if a pencil is used.)

For scribing or copying an angle such as a roof's gradient

After measuring the gradient, it can be used as a guide for a circular saw

Model with graduation can be used to measure length as well

±0.35 mm

Body: Aluminum 

Screw: Polypropylene resin

Write a review

Note: HTML is not translated!
    Bad           Good

Aluminum Sliding Bevel with Angle Scale 45cm

  • Brand: Shinwa
  • Product Code: 62661
  • Availability: In Stock
  • 540.00kr (SEK)

  • Ex Tax: 432.00kr (SEK)

Related Products

Miter Rule 3D 45°90°Aluminum

Miter Rule 3D 45°90°Aluminum

Can confirm 45 and 90-degree angles at the same time, and is easy to use for scribing lineCan draw a..

186.25kr (SEK) Ex Tax: 149.00kr (SEK)

Miter Rule 3D 45°Aluminum

Miter Rule 3D 45°Aluminum

Mark precise 45-degree angles both left and right just by sliding the Miter Rule. No need to reverse..

206.25kr (SEK) Ex Tax: 165.00kr (SEK)

Carpenter's Square with Fence 60cm/shaku

Carpenter's Square with Fence 60cm/shaku

Edge holds to the material tightly and prevents sliding when cutting with an electric circular saw o..

1,551.25kr (SEK) Ex Tax: 1,241.00kr (SEK)

Stainless Pickup Rule Hard Chrome Finish 1m

Stainless Pickup Rule Hard Chrome Finish 1m

JIS Grade 1(15 cm - 1 m)Bent end of the scale makes it easy to pick upBig numbers make it easy to re..

398.30kr (SEK) Ex Tax: 318.64kr (SEK)

Digital Vernier Caliper Carbon fiber Body 150mm

Digital Vernier Caliper Carbon fiber Body 150mm

Automatically powered on/off just by sliding the moduleWith auto power off functionZero set function..

361.25kr (SEK) Ex Tax: 289.00kr (SEK)

Digital Vernier Caliper with Hold Function 200mm

Digital Vernier Caliper with Hold Function 200mm

Ideal for precision work with a minimum reading value of 0.01 mmZero set function enables relative m..

998.75kr (SEK) Ex Tax: 799.00kr (SEK)

Digital Depth Gauge with Hold Function 150mm

Digital Depth Gauge with Hold Function 150mm

Ideal for precision work with a minimum reading value of 0.01 mmZero set function enables relative m..

1,138.00kr (SEK) Ex Tax: 910.40kr (SEK)

Digital Moisture Meter for Wood with Maximum and Minimum Hold Function

Digital Moisture Meter for Wood with Maximum and Minimum Hold Function

Can easily measure the moisture of wood, and supports a wide variety from building materials to fire..

1,343.75kr (SEK) Ex Tax: 1,075.00kr (SEK)

Tape Measure RIGHT GEAR 19-5.5m JIS

Tape Measure RIGHT GEAR 19-5.5m JIS

JIS Grade 1 (metric graduation model)Hook guard structure to protect hook from shocks due to drops, ..

148.75kr (SEK) Ex Tax: 119.00kr (SEK)

Tape Measure RIGHT GEAR 25-5.5m JIS

Tape Measure RIGHT GEAR 25-5.5m JIS

JIS Grade 1 (metric graduation model)Hook guard structure to protect hook from shocks due to drops, ..

173.75kr (SEK) Ex Tax: 139.00kr (SEK)

Incra Build-It Knobs 8 st

Incra Build-It Knobs 8 st

Easily attach user made stops and accessories to the T-Slots Connector on your Build-It assemblies. ..

115.00kr (SEK) Ex Tax: 92.00kr (SEK)

Stainless Pickup Rule Hard Chrome Finish 10cm

Stainless Pickup Rule Hard Chrome Finish 10cm

JIS Grade 1(15 cm - 1 m)Bent end of the scale makes it easy to pick upBig numbers make it easy to re..

38.75kr (SEK) Ex Tax: 31.00kr (SEK)

Stainless Pickup Rule Hard Chrome Finish 15cm

Stainless Pickup Rule Hard Chrome Finish 15cm

JIS Grade 1(15 cm - 1 m)Bent end of the scale makes it easy to pick upBig numbers make it easy to re..

41.25kr (SEK) Ex Tax: 33.00kr (SEK)

Stainless Pickup Rule Hard Chrome Finish 30cm

Stainless Pickup Rule Hard Chrome Finish 30cm

JIS Grade 1(15 cm - 1 m)Bent end of the scale makes it easy to pick upBig numbers make it easy to re..

83.75kr (SEK) Ex Tax: 67.00kr (SEK)

Incra Build-It Ratchet Handle Knobs

Incra Build-It Ratchet Handle Knobs

Easily attach user made stops and accessories to the T-Slots Connector on your Build-It assemblies. ..

162.50kr (SEK) Ex Tax: 130.00kr (SEK)

Digital Vernier Caliper Carbon fiber Body 100mm

Digital Vernier Caliper Carbon fiber Body 100mm

Automatically powered on/off just by sliding the moduleWith auto power off functionZero set function..

292.50kr (SEK) Ex Tax: 234.00kr (SEK)

Digital Vernier Caliper Carbon fiber Body 100mm

Digital Vernier Caliper Carbon fiber Body 100mm

Automatically powered on/off just by sliding the moduleWith auto power off functionZero set function..

292.50kr (SEK) Ex Tax: 234.00kr (SEK)

Digital Vernier Caliper Carbon fiber Body 150mm

Digital Vernier Caliper Carbon fiber Body 150mm

Automatically powered on/off just by sliding the moduleWith auto power off functionZero set function..

317.50kr (SEK) Ex Tax: 254.00kr (SEK)

Tags: aluminum, sliding, bevel, with, angle, scale, 45cm, 62661, marking, and, measuring, tools